Argolamp is a high-level lamp suitable for both speleological and speleo-underwater use.
It was born from a long and careful search for the best materials and the best technical solutions that make it the most versatile of all.
In the various speleo-diving explorations, Argolamp has highlighted its strong point by accompanying top-level speleo-divers such as Rick Stanton, Richard Herris, Torsten Wealde (Toddystile) in their most difficult explorations, in particular Richard Harris took it to a depth of 230 meters.
Autonomy:
System and buttons:
Switches like the buttons on GoPro diving suits, a specially designed steel spring system, rigid enough to work even at great depths, tested very well up to 124 meters.
3 O-rings, exceptional watertightness. System much appreciated by speleo divers, even with the use of very thick gloves, the sensitivity remains good.
Goodman System
Thanks to a support created directly on the battery pack it is possible to make the Argolamp a compact lamp, a system that can be used by cave divers to mount the lamp on the hand.
Circuit and protection
Electronic circuit of the Task LED, Dual Flex model. Designed for use in caves in collaboration with some speleo divers.
Main features:
· Adapt the light between 13 different combinations.
· Sequence of 3 presses to avoid accidental ignition.
· Overheat protection. Lower the light intensity until a safe temperature is reached.
· Protection against battery over-discharge: lithium batteries have a charge level below which they cannot go at the risk of being permanently damaged.
· Near total discharge, the power gradually weakens until it reaches level 1 and then switches off completely. You can restart the lamp and use it for another minute. This operation can be carried out indefinitely until a suitable place is found for replacing the battery.
Batteries and chargers
2 x 6800mAh lithium-ion batteries included.
3.7 Volt and 2 Amp/h charger.
Charging time +/- 4 hours
We recommend using 21700 Samsung INR21700-50E batteries. With this battery model, the danger of a short circuit that could occur inside the battery pack is avoided if the batteries were mistakenly inserted with reversed polarities. As can be seen, both the correct polarity and a symbol indicating the danger if the batteries are inserted incorrectly.
In the package:
· 1 lamp
· 2 batteries 21700
· 1 adapter for 18650 batteries
· 1 charger
· 1 elastic band
· 2 GoPro type aluminum supports, one to be used to be mounted on the helmet as a fixed support and 1 that can be mounted directly on the lamp to mount a GoPro on it.
· 3 spare O-ring for the battery pack
· Clamps to secure the battery pack to the helmet.
